Jiangsu Hopda Machinery Co., Ltd.
Jiangsu Hopda Machinery Co., Ltd.
Add to Cart
Automatic Wire Cable Buncher Double Twist Buncher , Cable Bunching Machine
Φ630mm double twist bunching machine
Specification:
| Model | YL-Φ630 |
| Diameter of conductor (mm) | Φ0.12-Φ0.52 |
| Twisting Section Area (mm2) | 0.2-6.0 |
| Range of pitch (mm) | 11.48-100.02 |
| Max rotation speed (rpm) | 1600/2000 |
| Main motor (kw) | 7.5 |
| Take-up bobbin (mm) | Φ630 |
| Tension of take-up | Control by magnetic powder clutch |
| Twisting direction | “S” or “Z” |
| traversing | Pitch & width adjustable |
| Auto-brake | Auto-brake once wire broken inside/outside |
| Auto-stop | Auto-length-counting. auto-brake&signal when reaching the set length |
| Bearing | International famous Brand |
Description and application:
Our double twist bunching machine, applied to bunch-twisting copper conductor, copper clad aluminum wire, varnished wire, tinned wire, etc., boasts industry-leading specifications, with a maximum speed of 3000 rounds per minute and the capability to strand wires ranging from 0.08 to 0.28mm in diameter. Additionally, its advanced auto-stop capability contributes to a smoother stranding process, enhancing efficiency and productivity. Its advanced auto-brake feature ensures minimal waste of resources in the event of wire breakage, whether internal or external.
Features:
About Products
The Φ630mm Double Twist Bunching Machine is a type of machinery used in the cable and wire manufacturing industry. It is designed to perform the bunching process on multiple wires or cables simultaneously. Here's a general product description for a Φ630mm Double Twist Bunching Machine:
Capacity: The "Φ630mm" in the machine's name typically refers to its maximum wire or cable diameter. It indicates that the machine is capable of handling wires or cables up to a certain diameter, such as 630mm.
Double Twist Bunching: The machine is specifically designed for the double twist bunching process. This involves twisting two or more wires or cables together simultaneously to form a bundled and more compact structure. Double twist bunching is commonly used to enhance the electrical and mechanical properties of the cables.
Bunching Speed: The bunching speed of the machine can vary depending on the specific model and manufacturer. It is typically adjustable to accommodate different wire or cable types and desired bunching requirements. The speed is usually measured in rotations per minute (RPM).
Frame Design: The machine features a frame design that holds multiple bobbins or spools of wires or cables. The wires or cables from the individual spools are fed into the machine, and the double twist bunching process is performed within the machine's structure.
Control System: The machine is equipped with a control system that allows operators to adjust and monitor various parameters during the bunching process. This control system may include features for setting and controlling bunching speed, tension, direction of rotation, and other relevant parameters.
Safety Features: The bunching machine is designed with safety features to ensure operator safety and prevent accidents. These safety features can include emergency stop buttons, safety guards, and sensors that detect abnormalities or malfunctions. The specific safety features can vary depending on the manufacturer and model.
Power Requirements: The machine typically requires a three-phase electrical power supply at a specific voltage and frequency. The exact power requirements may vary depending on the machine's specifications and the region in which it is used.
It's important to note that the specific features and specifications of a Φ630mm Double Twist Bunching Machine can vary depending on the manufacturer and model. For detailed information, it is recommended to consult the manufacturer's documentation or contact a supplier specializing in wire and cable machinery.
product
